Modelling of stationary three-dimensional separated air flows around an Ahmed reference model
ESAIM: Proc., 7 (1999) 173-182
Published online: 2002-08-15
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Flow over a 25°Ahmed body at a Reynolds number characteristic of suburban driving speeds
Skylar Polek, Yi-Tung Chen and Melissa MorrisInternational Journal of Heat and Fluid Flow 106 109318 (2024)
https://doi.org/10.1016/j.ijheatfluidflow.2024.109318
Particle dispersion in the turbulent wake of an Ahmed body: An experimental and computational study
Manish K Mathur, Murali R Cholemari, S V Veeravalli and Mukesh KhareSādhanā 49 (1) (2024)
https://doi.org/10.1007/s12046-023-02397-5
Integrated Evolutionary Algorithms/Computational Fluid Dynamics for Drag Reduction in Highway Design
Peng Zhang, Anh-Vu Vo, Debra F. Laefer and Maurizio PorfiriJournal of Infrastructure Systems 27 (3) (2021)
https://doi.org/10.1061/(ASCE)IS.1943-555X.0000625
An URANS Simulation of the Kelvin-Helmholtz Aerodynamic Effect over the Ahmed Body
Sultan SADYKOV, Rinat KHALİMOV, Yestay KYLYSHBEK, Sagidolla BATAY and Yong ZHAOInternational Journal of Automotive Science and Technology 5 (2) 166 (2021)
https://doi.org/10.30939/ijastech..923917
Research on improvements of low Reynolds number turbulence model based on flow around automobiles
Yi Yang, Guanglin Qiang, Zhen Chen, Zhengqi Gu and Yong ZhangNumerical Heat Transfer, Part A: Applications 78 (11) 674 (2020)
https://doi.org/10.1080/10407782.2020.1804791
Improved CFD prediction of flows past simplified and real-life automotive bodies using modified turbulence model closure coefficients
Charles Patrick Bounds, Chunhui Zhang and Mesbah UddinProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 234 (10-11) 2522 (2020)
https://doi.org/10.1177/0954407020916671
2121 040001 (2019)
https://doi.org/10.1063/1.5115872
Comparative Analysis of Turbulence Models for Automotive Aerodynamic Simulation and Design
Dastan Igali, Olzhas Mukhmetov, Yong Zhao, Sai Cheong Fok and Soo Lee TehInternational Journal of Automotive Technology 20 (6) 1145 (2019)
https://doi.org/10.1007/s12239-019-0107-7
Turbulence Modeling Effects on the CFD Predictions of Flow over a Detailed Full-Scale Sedan Vehicle
Chunhui Zhang, Charles Patrick Bounds, Lee Foster and Mesbah UddinFluids 4 (3) 148 (2019)
https://doi.org/10.3390/fluids4030148
Effect of Reynolds number on flow behavior and pressure drag of axisymmetric conical boattails at low speeds
The Hung Tran, Takumi Ambo, Taekjin Lee, et al.Experiments in Fluids 60 (3) (2019)
https://doi.org/10.1007/s00348-019-2680-y
Effect of blowing flow control and front geometry towards the reduction of aerodynamic drag on vehicle models
Rustan Tarakka, Nasaruddin Salam, J Jalaluddin and Muhammad IhsanFME Transactions 47 (3) 552 (2019)
https://doi.org/10.5937/fmet1903552T
1 (2018)
https://doi.org/10.4271/2018-01-0720
1 (2018)
https://doi.org/10.4271/2018-01-0476
Analysis of the Vorticity in the Near Wake of a Station Wagon
Omar D. Lopez Mejia, Sergio A. Ardila Gómez, David E. Blanco Otero and Luis E. Muñoz CamargoJournal of Fluids Engineering 139 (2) (2017)
https://doi.org/10.1115/1.4034523
Research on the Aerodynamic Characteristics of the Ahmed Body with a Modified LRN $${k-\varepsilon}$$ k - ε Turbulence Model Using a Transition-Code-Based Method
Zhengqi Gu, Zhen Chen, Chengjie Feng, Taiming Huang and Zhendong YangArabian Journal for Science and Engineering 41 (5) 1771 (2016)
https://doi.org/10.1007/s13369-015-1985-2
The Aerodynamics of Heavy Vehicles III
Charles-Henri Bruneau, Emmanuel Creusé, Delphine Depeyras, Patrick Gilliéron and Iraj MortazaviLecture Notes in Applied and Computational Mechanics, The Aerodynamics of Heavy Vehicles III 79 363 (2016)
https://doi.org/10.1007/978-3-319-20122-1_23
Computational and experimental investigations of the vortical flow structures in the near wake region downstream of the Ahmed vehicle model
Tural Tunay, Bulent Yaniktepe and Besir SahinJournal of Wind Engineering and Industrial Aerodynamics 159 48 (2016)
https://doi.org/10.1016/j.jweia.2016.10.006
Aerodynamic drag reduction of an Ahmed body based on deflectors
Wang Hanfeng, Zhou Yu, Zou Chao and He XuhuiJournal of Wind Engineering and Industrial Aerodynamics 148 34 (2016)
https://doi.org/10.1016/j.jweia.2015.11.004
Effect of underbody diffuser on the aerodynamic drag of vehicles in convoy
Deepinder Jot Singh Aulakh and Duc PhamCogent Engineering 3 (1) 1230310 (2016)
https://doi.org/10.1080/23311916.2016.1230310
The effect of aspect ratio on the wake of the Ahmed body
J. Venning, D. Lo Jacono, D. Burton, M. Thompson and J. SheridanExperiments in Fluids 56 (6) (2015)
https://doi.org/10.1007/s00348-015-1996-5
(2014)
https://doi.org/10.2514/6.2014-2561
Effects of rear slant angles on the flow characteristics of Ahmed body
Tural Tunay, Besir Sahin and Veli OzbolatExperimental Thermal and Fluid Science 57 165 (2014)
https://doi.org/10.1016/j.expthermflusci.2014.04.016
Effect of the vortex dynamics on the drag coefficient of a square back Ahmed body: Application to the flow control
Charles-Henri Bruneau, Emmanuel Creusé, Patrick Gilliéron and Iraj MortazaviEuropean Journal of Mechanics - B/Fluids 45 1 (2014)
https://doi.org/10.1016/j.euromechflu.2013.11.003
Structure of turbulent flows over two-dimensional bluff bodies inspired by a pickup truck geometry
Martin Agelin-ChaabInternational Journal of Heat and Fluid Flow 50 417 (2014)
https://doi.org/10.1016/j.ijheatfluidflow.2014.10.004
The importance of rear pillar geometry on fastback wake structures
Joshua Fuller and Martin A. PassmoreJournal of Wind Engineering and Industrial Aerodynamics 125 111 (2014)
https://doi.org/10.1016/j.jweia.2013.11.002
On simulating the turbulent flow around the Ahmed body: A French–German collaborative evaluation of LES and DES
Eric Serre, Matthieu Minguez, Richard Pasquetti, et al.Computers & Fluids 78 10 (2013)
https://doi.org/10.1016/j.compfluid.2011.05.017
Aerodynamic drag control by pulsed jets on simplified car geometry
Patrick Gilliéron and Azeddine KourtaExperiments in Fluids 54 (2) (2013)
https://doi.org/10.1007/s00348-013-1457-y
Wall shear stress characterization of a 3D bluff-body separated flow
Grégoire Fourrié, Laurent Keirsbulck and Larbi LabragaJournal of Fluids and Structures 42 55 (2013)
https://doi.org/10.1016/j.jfluidstructs.2013.05.014
Reducing Vehicle Drag Force Through a Tapered Rear Side Wall
Behrang Daryakenari, Shahrir Abdullah and Rozli ZulkifliSAE International Journal of Commercial Vehicles 6 (2) 582 (2013)
https://doi.org/10.4271/2013-01-9020
Numerical and Experimental Investigation on Vehicles in Platoon
Paolo Schito and Francesco braghinSAE International Journal of Commercial Vehicles 5 (1) 63 (2012)
https://doi.org/10.4271/2012-01-0175
Active Technique by Suction to Control the Flow Structure over a Van Model
Harinaldi ., Budiarso ., Warjito ., et al.Journal of Engineering and Applied Sciences 7 (2) 215 (2012)
https://doi.org/10.3923/jeasci.2012.215.222
MODIFICATION OF FLOW STRUCTURE OVER A VAN MODEL BY SUCTION FLOW CONTROL TO REDUCE AERODYNAMICS DRAG
Harinaldi ., Budiarso ., Warjito ., Engkos Achmad Kosasih, Rustan Tarakka, Sabar Pangihutan Simanungkalit and I Gusti Made Fredy Lay TeryantoMAKARA of Technology Series 16 (1) (2012)
https://doi.org/10.7454/mst.v16i1.1021
Experimental investigation on the flow around a simplified geometry of automotive engine compartment
Marion D’Hondt, Patrick Gilliéron and Philippe DevinantExperiments in Fluids 50 (5) 1317 (2011)
https://doi.org/10.1007/s00348-010-0980-3
Numerical simulation with a DES approach for automotive flows
Emmanuel Guilmineau, GanBo Deng and Jeroen WackersJournal of Fluids and Structures 27 (5-6) 807 (2011)
https://doi.org/10.1016/j.jfluidstructs.2011.03.010
1 (2011)
https://doi.org/10.4271/2011-26-0107
Bluff-body drag reduction using a deflector
Grégoire Fourrié, Laurent Keirsbulck, Larbi Labraga and Patrick GilliéronExperiments in Fluids 50 (2) 385 (2011)
https://doi.org/10.1007/s00348-010-0937-6
Influence of the Slant Angle of 3D Bluff Bodies on Longitudinal Vortex Formation
Patrick Gilliéron, Annie Leroy, Sandrine Aubrun and Pierre AudierJournal of Fluids Engineering 132 (5) 051104 (2010)
https://doi.org/10.1115/1.4001450
Coupling active and passive techniques to control the flow past the square back Ahmed body
Charles-Henri Bruneau, Emmanuel Creusé, Delphine Depeyras, Patrick Gilliéron and Iraj MortazaviComputers & Fluids 39 (10) 1875 (2010)
https://doi.org/10.1016/j.compfluid.2010.06.019
Drag and lift reduction of a 3D bluff-body using active vortex generators
Jean-Luc Aider, Jean-François Beaudoin and José Eduardo WesfreidExperiments in Fluids 48 (5) 771 (2010)
https://doi.org/10.1007/s00348-009-0770-y
Drag reduction by flow separation control on a car after body
Mathieu Rouméas, Patrick Gilliéron and Azeddine KourtaInternational Journal for Numerical Methods in Fluids 60 (11) 1222 (2009)
https://doi.org/10.1002/fld.1930
1 (2009)
https://doi.org/10.4271/2009-26-0057
Numerical Simulation of Turbulent Flows and Noise Generation
Christine Baur, Patrick Bontoux, Michael Kornhaas, et al.Notes on Numerical Fluid Mechanics and Multidisciplinary Design, Numerical Simulation of Turbulent Flows and Noise Generation 104 309 (2009)
https://doi.org/10.1007/978-3-540-89956-3_13
IUTAM Symposium on Flow Control and MEMS
C.-H. Bruneau, I. Mortazavi and P. GilliéronIUTAM Bookseries, IUTAM Symposium on Flow Control and MEMS 7 405 (2008)
https://doi.org/10.1007/978-1-4020-6858-4_50
Automobile et environnement : contribution de la recherche aérodynamique à la réduction des gaz à effet de serre
Patrick Gilliéron and Azeddine KourtaMécanique & Industries 9 (6) 519 (2008)
https://doi.org/10.1051/meca/2009016
1 (2008)
https://doi.org/10.4271/2008-01-0740
Passive Control Around the Two-Dimensional Square Back Ahmed Body Using Porous Devices
Charles-Henri Bruneau, Iraj Mortazavi and Patrick GilliéronJournal of Fluids Engineering 130 (6) (2008)
https://doi.org/10.1115/1.2917423
1 (2008)
https://doi.org/10.4271/2008-01-0100
Numerical modelling and passive flow control using porous media
Charles-Henri Bruneau and Iraj MortazaviComputers & Fluids 37 (5) 488 (2008)
https://doi.org/10.1016/j.compfluid.2007.07.001
The vortex structure behind an Ahmed reference model in the presence of a moving ground plane
R. K. Strachan, K. Knowles and N. J. LawsonExperiments in Fluids 42 (5) 659 (2007)
https://doi.org/10.1007/s00348-007-0270-x
1 (2007)
https://doi.org/10.4271/2007-26-050
Flow manipulation around the Ahmed body with a rear window using passive strategies
Charles-Henri Bruneau, Patrick Gilliéron and Iraj MortazaviComptes Rendus. Mécanique 335 (4) 213 (2007)
https://doi.org/10.1016/j.crme.2007.03.003
Computational Fluid Dynamics 2004
Charles-Henri Bruneau, Iraj Mortazavi and Gwendal WilczykComputational Fluid Dynamics 2004 343 (2006)
https://doi.org/10.1007/3-540-31801-1_47
Dispersion in the near wake of idealized car model
Kévin Gosse, Pierre Paranthoën, Béatrice Patte-Rouland and Michel GonzalezInternational Journal of Heat and Mass Transfer 49 (9-10) 1747 (2006)
https://doi.org/10.1016/j.ijheatmasstransfer.2005.12.003
FLOMANIA — A European Initiative on Flow Physics Modelling
Notes on Numerical Fluid Mechanics and Multidisciplinary Design (NNFM), FLOMANIA — A European Initiative on Flow Physics Modelling 94 421 (2006)https://doi.org/10.1007/978-3-540-39507-2_46
Unsteady flow simulation of the Ahmed reference body using a lattice Boltzmann approach
Ehab FaresComputers & Fluids 35 (8-9) 940 (2006)
https://doi.org/10.1016/j.compfluid.2005.04.011
Contribution de l'aérodynamique au développement durable et sécuritaire dans l'automobile
Patrick Gilliéron and Eugénie Levallois-GoyMécanique & Industries 6 (6) 567 (2005)
https://doi.org/10.1051/meca:2006001
1 (2004)
https://doi.org/10.4271/2004-01-0442
(2003)
https://doi.org/10.2514/6.2003-857
Large eddy simulation of an Ahmed reference model
R J A Howard and M PourquieJournal of Turbulence 3 N12 (2002)
https://doi.org/10.1088/1468-5248/3/1/012
Advances in LES of Complex Flows
R. J. A. Howard, M. Lesieur and U. BiederFluid Mechanics and Its Applications, Advances in LES of Complex Flows 65 185 (2002)
https://doi.org/10.1007/0-306-48383-1_12
1 (2001)
https://doi.org/10.4271/2001-01-0700